Expanded Dab + Information; Menu Functions Dab - JVC RV-NB200BT Notice D'emploi

Expanded DAB + information

With DAB + additional information is transmitted in addition to the music signal. These can be retrie-
ved as follows.
Press the "INFO" button on the remote control to retrieve the following information in succession:
• Signal level: The display shows the level using icons from left to right.
The more icons displayed, the better the reception.
• PTY (Program Type): This designates the classification of the stations according to genre, e.g. Pop,
News, Religion, Info, Classics, etc.
• Name of the ensemble, e.g. DR Germany
• Display of channel and frequency of the set station
• ERR XX: This information shows the error rate of the digital reception. This is also dependent on
the signal level and can also be used to align the antenna.
• XX kbps: Display of the data rate of the station e.g. 80 kbit/s. The data rate may vary from station
to station.
• DABPLUS: Designates the reception mode "DAB +".
• Current date

Menu functions DAB +

Pressing and holding the"MENU" button opens a menu in which you can set various functions for
DAB+. Use the or
• Full scan: Another automatic station search. Confirm the function with the uII button.
• Manual tune: This allows you to manually set a specific reception station. Using the uII button
confirms the function and shows the currently set station with the corresponding frequency.
• Press the or button to manually select another channel. Using the uII button you can
confirm the selection. After that, the signal level is shown in the display, another press charges the
current ensemble.
• DRC (Dynamic Range Control): If supported by the selected station, it is possible to adjust the
dynamic range. Possible settings are "Off", "Low" and "High". The selection is made using the
or buttons, the selection is confirmed with the uII button.
• PRUNE: This deletes invalid stations from the station list. Select "Yes/No" using the
buttons and confirm the selection with the uII button.
• SYSTEM: Settings for sleep timer, time, backlight, language and factory settings, software upgrade
and software version.
18
buttons to scroll through the menu. The following functions are available:
or ,