Care And Maintenance - auna Bella Ann Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
Factory reset
In the STAND BY state, press the host DN/F.R button once, then press and
hold the PLAY/PAUSE button for 2 seconds to display: "System reset Please
wait" until "System reset Ok", indicating completed to reset.

CARE AND MAINTENANCE

Care of the cabinets:
You should care for the cabinet as you would care for any piece of the
furniture. When the cabinet becomes dusty wipe it with a sout, non-abrasive
dust cloth. If the cabinet becomes smudged with fingerprints you may use
any good quality commercial dusting and polishing spray cleaner, however
avoid spraying the plastic or metal parts of this system. We recommend
that you spray the cleaner on your dust cloth, not directly on the cabinet, to
avoid getting any of the spray on the plastic or metal parts.
Compact disc care
To remove a disc from its storage case, press down on the centre of the
case and lift the disc out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the discs recorded
surface with a soft cloth. Unlike conventional records, compact discs have
no grooves to collect dust and microscopic debris, so gently wiping with
a soft cloth should remove most particles. Wipe in a straight line from the
inside to the outside of the disc. Small dust particles and light stains will
have absolutely no effect o.reproduction quality.
Clean the disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the disc. If necessary, use a CD
cleaning kit. Never write no or affix labels to the surface of compact discs.
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1003501310035014

Table des Matières