VWR 444-0268 Manuel D'instructions page 15

A
CCESSORIES
UNIVERSAL HARNESS
M
ICROPLATE
D C
ESCRIPTION APACITY
Universal Harness 2 or 4
Installation of Universal Harness - Mini Shaker
1. Unit should be in standby mode.
2. Remove non-skid rubber mat.
3. Line up the holes in center post with the two holes in middle of the tray.
Using the screws provided, hand tighten into place using a flathead
screwdriver. DO NOT over tighten.
4. Place sample(s) on tray.
5. Stretch the harness bands over the sample(s) and then under each of the
bent-down corners of the tray.
Not for use with the Microplate Shaker.
P
LATFORM
C C . N .
APACITY AT O
1 444-0277
UNIVERSAL PLATFORM
The Universal Platform has a non-skid rubber surface with adjustable clamping
bars to accommodate various vessel types. Stainless steel construction.
D S
ESCRIPTION IZE
Universal Platform 29.7 x 22.1cm
Installation of Universal Platform - Mini Shaker
1. Unit should be in standby mode.
2. Remove non-skid rubber mat.
3. Line up the holes in the Universal Platform to the holes in the tray. Using
the screws provided, hand tighten into place using a flathead screwdriver.
DO NOT over tighten.
4. Add glassware. Adjust rollers by loosening each of the thumbscrews. Slide
the padded rollers to the desired position and retighten the thumbscrews.
Not for use with the Microplate Shaker.
P
LATFORM
(L W) C
X APACITY
1
C . N .
AT O
444-0282
14