Controls - Winix ZERO AZBU330-HWE Manuel D'utilisation

CONTROLS

Air
Outlet
Vent
PlasmaWave Indicator
Indicates whether
PlasmaWave is enabled or
disabled.
Mode Button
Press to cycle through
and set the desired
mode of operation
(Auto, Sleep).
Air Quality Power Button
Turns the unit on
Indicator
or o .
Color-coded LED
indicates one of
three levels of air
Fan Speed Button
quality.
Enables Manual operation of the
unit. Press to cycle through and
set the desired fan speed (Low,
Medium, High, Turbo).
English
Timer Indicator
If timer has been set, the
LED light indicates the set
time of operation.
Fan Speed
Indicator
Indicates the
current fan speed.
소피아 1
PlasmaWave Button
Enables or disables
PlasmaWave .
소피아 2 영문
소피아 1
Reset Button
After replacing a lter,
press the RESET button
for at least 5 seconds.
Timer Button
Press to cycle
through and set
desired length of
operation (1hr,
4hr, 8hr,[NO
TIMER])
Change Filter Indicator
LED light indicates when it is time to
change the lter.
Light Sensor
Detects the
amount of
ambient light
within the
environment,
to adjust the
brightness
of the LED
indicators.
ZERO
4