Whirlpool WFE975H0HV Guide D'utilisation page 18

Problem Possible Causes and/or Solutions
Display shows Power failure (display shows flashing time): Clear the display. On some models, reset the clock, if needed.
messages
See "Clock" keypad feature in the "Feature Guide" section.
Error code (display shows letter followed by number): Depending on your model, press CANCEL to clear
the display. See "Control Display" in the "Electronic Oven Controls" section. If it reappears, call for service.
Clean cycle did not Several cooking cycles between Clean cycles or spills on oven walls and doors: Run additional
work on all spills
Clean cycles. Use the AquaLift
can be used for stubborn soils. See the "Accessories" and "Clean Cycle" sections for more information.
Mineral deposits Tap water was used in the Clean cycle: Use distilled or filtered water in the Clean cycle.
are left on the oven
To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to thoroughly
bottom after the
remove any vinegar residue.
Clean cycle
Range is not level: Mineral deposits will collect on dry areas of the oven bottom during the Clean cycle. Level
the range. See the Installation Instructions.
To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to
thoroughly remove any vinegar residue.
Oven cooking results
Range is not level: Level the range. See the Installation Instructions.
not what expected
The set temperature was incorrect: Double-check the recipe in a reliable cookbook.
Oven temperature needs adjustment: See "Oven Temperature Control" in the "Electronic Oven
Controls" section.
Oven was not preheated: See the "Baking and Roasting" section.
Racks were positioned improperly: See the "Positioning Racks and Bakeware" section.
Not enough air circulation around bakeware: See the "Positioning Racks and Bakeware" section.
Darker browning of food caused by dull or dark bakeware: Lower oven temperature 25°F (15°C) or move
rack to a higher position in the oven.
Lighter browning of food caused by shiny or light colored bakeware: Move rack to a lower position in the
oven.
Batter distributed unevenly in pan: Check that batter is level in the pan.
Incorrect length of cooking time was used: Adjust cooking time.
Oven door was not closed: Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking: Oven peeking releases oven heat and can result in longer cooking
times.
Rack is too close to bake burner, making baked items too brown on bottom: Move rack to higher position
in the oven.
Pie crusts browning too quickly: Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
18
Technology Cleaning Kit. Kitchen and Appliance Cleaner or Cooktop Cleaner
®