Yakima Boat Loader Instructions De Montage page 4

SECURE THE LOAD FOR TRAVEL.
SLIDE THE EXTENSION BACK INTO THE CROSSBAR.
• Loosen the knob
and push the
extension back in.
TEST THE
INSTALLATION.
Test movement by rocking
boat. If loose, tighten
hardware and straps.
READ THESE WARNINGS!
ATTACHMENT HARDWARE CAN LOOSEN
OVER TIME. CHECK AND TIGHTEN IF
NECESSARY, BEFORE EACH USE.
1032499B-4/12
BEFORE DRIVING AWAY:
✓
Secure front and rear
of long loads to ends
of vehicle for safe
transport.
✓
Be sure the extension is completely
pushed in and tightened.
• Tighten the
knob again.
✓
FAILURE TO PERFORM SAFETY CHECKS BEFORE
DRIVING AWAY CAN RESULT IN PROPERTY
DAMAGE, PERSONAL INJURY, OR DEATH.
CENTER THE
BOAT OVER THE
RACKS.
Follow accessory
instructions to
secure the boat to
the vehicle.
Be sure all hardware is secured
according to instructions.