Switching On The Refrigerator; Selecting Cooling Level - Norcold N2000 Serie Mode D'emploi

Clean the inside of the refrigerator properly with warm water and
•
household detergent and dry carefully with a soft cloth.
Ensure that the DC electricity supply is connected and turned on.
•

6. Switching on the refrigerator

To switch on the refrigerator:
Push the on/off button and hold it for a few seconds.
•
After a few seconds the control panel will change to stand−by and locked mode. The
blue on/off button indicates the refrigerator is still in function.
To switch off the refrigerator, push and hold the on/off button for a few seconds.
For optimal performance, switch on the refrigerator 4 hours before placing food.

7. Selecting cooling level

To select the cooling level:
First unlock the control panel, if applicable. Press the Fresh Food, Frozen Food or night mode
•
area and hold it for a few seconds until the icons start blinking.
Slide or press the temperature icons to select the desired cooling level.
•
After a few seconds, the control panel will save the settings and go to the locked stand−by
•
mode.
When display is locked, the icons will turn off, only on/off and night mode will stay
•
illuminated.
8