Operation; Lamp Replacement - Klarstein ZELDA Mode D'emploi

EN
24

OPERATION

Touch Control
Depress this button to turn on/off the motor.
Press this button for increasing the speed of the fan.
Press this button for decreasing the speed of the fan.
Turn on/off light.
Fan speed display:
1 = low speed
2 = medium speed
3 = high speed
Quick timer
Press + & - hold for 1 second, Digital display will flashing & into 5 minutes count down,
after 5 minutes motor & light will turn off automatic & Buzzer sound for 1 second.

LAMP REPLACEMENT

1 Disconnect the light wiring point
which is located within the hood,
(behind the grease filer).
2 Then use a screw driver remove the
bulb holders and wiring from the
hood. Replace with the same type
and rated lamp: LED (max 1.5 W).