Operation - Klarstein 10013866 Mode D'emploi

Before you set the device into operation for the first time, connect the hood to the power supply (mind the
general security guidelines).
Before you can use the remote conntrol you have to remove the protective film.
Controls
ON/OFF
Fan
Light
Setting the clock
Setting the
delayed off
Moving the
damper
Delayed off

Operation

Touch the button to start ventilation.
By touching this button again you change to 3 different ventilation speeds.
„F1" Low level
„F2" Middle level
„F3" High level
Touch this button to switch the light on or off.
In standby-mode you can set the clock. Do not touch any other button 10 seconds
before this one.
In operation mode you can set the delayed off.
In standby-mode touch this button for 3 seconds in order to move the damper up
or down. Thus you can reach all surfaces for cleaning.
Touch this button in order to run the ventilator for the set time.
By pressing this button again you leave the delayed off mode and the device shuts
down.
12