Yu-1304/90890-01304; Piston Pin Puller Set - Yamaha YZ85 Manuel D'atelier Du Proprietaire

CYLINDER HEAD, CYLINDER AND PISTON
EC473000
REMOVAL POINTS
Piston and piston ring
1. Remove:
Piston pin clip 1
G
NOTE:
Before removing piston pin clip, cover the
crankcase with a clean rag to prevent piston
pin clip from falling into the crankcase cavity.
5PA40410
2. Remove:
Piston pin 1
G
Piston 2
G
Small end bearing 3
G
NOTE:
Before removing the piston pin, deburr the clip
groove and pin hole area. If the piston pin
groove is deburred and piston pin is still diffi-
cult to remove, use the piston pin puller set 4.
5PA40420
CAUTION:
Do not use a hammer to drive the piston
pin out.
3. Remove:
Piston ring 1
G
NOTE:
Take care not to scratch the piston and dam-
age the piston ring.
5PA40430
INSPECTION
Cylinder head
1. Eliminate:
Carbon deposits
G
Use a rounded scraper 1.
NOTE:
Take care to avoid damaging the spark plug
threads. Do not use a sharp instrument. Avoid
scratching the aluminum.
5PA40440
4 - 17
ENG

Piston pin puller set:

YU-1304/90890-01304