Ym-01454/90890-01454; Damper Rod Holder - Yamaha YZ85 Manuel D'atelier Du Proprietaire

FRONT FORK
EC553201
Inner tube
1. Remove:
Dust seal 1
G
Stopper ring 2
G
Using slotted-head screwdriver.
CAUTION:
Take care not to scratch the inner tube.
5PA50860
2. Remove:
Inner tube 1
G
Oil seal removal steps:
Push in slowly a the inner tube just before
G
it bottoms out and then pull it back quickly
b.
Repeat this step until the inner tube can
G
be pulled out from the outer tube.
5PA50870
EC553311
Damper rod
1. Remove:
Base valve 1
G
Damper rod 2
G
NOTE:
Use a damper rod holder 3 to lock the damper
rod.
5PA50880
EC554000
INSPECTION
EC554100
Damper rod
1. Inspect:
Damper rod 1
G
Bend/damage → Replace damper rod.
CAUTION:
5PA50890
The front fork with a built-in piston rod has
a very sophisticated internal construction
and is particularly sensitive to foreign
material.
Use enough care not to allow any foreign
material to come in when the oil is replaced
or when the front fork is disassembled and
reassembled.
5 - 30
CHAS

Damper rod holder:

YM-01454/90890-01454