Ym-01434/90890-01434; Rod Holder - Yamaha YZ85 Manuel D'atelier Du Proprietaire

FRONT FORK
EC556000
HANDLING NOTE
NOTE:
The front fork requires careful attention. So it is
recommended that the front fork be maintained
at the dealers.
CAUTION:
To prevent an accidental explosion of air,
the following
observed:
The front fork with a built-in piston rod
G
has a very sophisticated internal con-
struction and is particularly sensitive to
foreign material.
Use enough care not to allow any foreign
material to come in when the oil is
replaced or when the front fork is disas-
sembled and reassembled.
Before removing the cap bolts or front
G
forks, be sure to extract the air from the
air chamber completely.
EC553000
REMOVAL POINTS
Front fork cap bolt
1. Remove:
Front fork cap bolt 1
G
From the outer tube.
NOTE:
Before removing the front fork from the
machine, loosen the front fork cap bolt.
2. Remove:
5PA50840
Front fork cap bolt 1
G
NOTE:
Set the rod holder 2 between the locknut 3
G
and washer 4.
Hold the locknut and remove the front fork
G
cap bolt.
5PA50850
5 - 29
CHAS
instructions

Rod holder:

YM-01434/90890-01434

should be