Attaching The Ice Cream Maker For Tilt-Head Mixers - KitchenAid KICA0WH Mode D'emploi

ICE CREAM MAKER ATTACHMENT SAFETY
9. Do not let the cord hang over the edge of table or counter.
10. Do not let the cord contact hot surfaces, including the stove.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.
USING THE ICE CREAM MAKER ATTACHMENT

ATTACHING THE ICE CREAM MAKER FOR TILT-HEAD MIXERS

Before first use
Before using your attachment, remove the "Do not immerse in water" label. The dasher is
dishwasher safe. The freeze bowl and drive assembly must be washed by hand.
1
Turn Stand Mixer OFF and unplug.
IMPORTANT: Do not pour ice cream batter into the freeze bowl until all parts are
assembled and the mixer is running.
NOTE: Use the freeze bowl immediately upon removal from freezer, as it begins to
thaw once removed.
Place the dasher inside the
3
freeze bowl.
4 | USING THE ICE CREAM MAKER ATTACHMENT
W11111749A_EN_v07.indd 4
Tilt motor head back and remove the
2
mixing bowl.
Place the freeze bowl on the bowl-
4
clamping plate.
Bowl-clamping
plate
5/31/17 9:18 AM