Bosch 1617 Consignes De Fonctionnement/Sécurité page 20

BM 2610925542 9-05
FIG. 27
BASE
DESIRED
WIDTH
DELUXE ROUTER GUIDE
(Not included, available as accessory)
The Bosch deluxe router guide is an optional
accessory that will guide the router parallel to
a straight edge or allow you to create circles
and arcs.
The deluxe router guide is supplied with two
rods and screws to fasten the guide (Fig. 27).
In addition, it features a fine adjustment knob
and indicator for accurately positioning the
edge guide relative to the bit. With the guide
installed and adjusted, the router should be
9/1/05 4:33 PM
CUT
6mm WING
SCREW
WORKPIECE
Page 20
FEED
DIRECTION
FINE
ADJUSTMENT
KNOB
fed normally, keeping the guide in contact
with the edge of the workpiece at all times.
The deluxe router guide may also be
positioned directly under the router base for
operations where a cut is needed close to or
at the edge of the work.
The deluxe router guide includes a dust
extraction hood and the VAC002 vacuum
hose adapter.
For complete instructions on installation and
operation, please refer to the instructions
which are included with this accessory.
-20-
6mm WING SCREW
FINE ADJUSTMENT
INDICATOR
ROUTER
GUIDE
RODS