General Instructions; Safety Instructions - Grammer COMPACTO Basic W Mode D'emploi

General instructions

The operating instructions must be read in full before use.
• • • •
The operating instructions must be kept in the vehicle and always be at hand.
• • • •
The driver's seat may only be fitted, serviced and repaired by specialist personnel.
• • • •
The respective national regulations and the vehicle manufacturer's fitting instructions must
be observed.
The national fitting regulations can be obtained from GRAMMER AG or from agencies of
the company, or from the vehicle manufacturer.
Worn parts such as rollers, shock absorbers and the fixation must be checked from time to
• • • •
time.
A correctly functioning and individually adjusted driver's seat is essential to your health.
• • • •
Take adequate care of your seat and have it serviced regularly to ensure that it functions
correctly.
The functional checks are to be carried out at least as regularly as vehicle services
(see maintenance plan for vehicle).
These operating instructions should always be kept with the driver's seat. If the seat is
• • • •
passed on to a third party, it must be accompanied by the relevant operating instructions.
Subject to modifications serving engineering progress and deviations compared to the
• • • •
standard type seat arising therefrom.

Safety instructions

Driver's seats that have been adjusted incorrectly have a smaller moving area.
• • • •
In order to prevent any personal injury, the seat must be adjusted for the driver's weight
before use and before every change of driver.
To prevent injury, no objects should be placed within the moving area of the driver's
• • • •
seat.
Before commissioning of the driver's seat, possible packaging material has to be
• • • •
removed from the seat cushion and the backrest upholstery.
To eliminate any risk of accident, the settings must be checked to ensure they are
• • • •
correctly engaged before the vehicle is driven.
Adjustments must not be made while driving.
• • • •
Only touch the handle for setting the fore/aft adjustment at the indented grip provided for
• • • •
that purpose.
– RISK OF CRUSHING –
After removal of the backrest upholstery, the backrest frame must be supported, for
• • • •
example held in place, before the backrest adjuster is operated. If you fail to do so, there is
a danger that the backrest frame may jerk forward and cause injury.
18
GB