Lenz Digital plus SILVER direct Mode D'emploi page 32

32
Function mapping:
57
Each bit of the CV stands for a function of the digital system:
-
Bit 1(0) for function 1, Bit 2(1) for function 2 and so on up to
59
Bit 8(7) for function 8. If you wish to allocate a function to the
dimming, the respective bit must be set.
0-255
57 Dimming (no ex-works setting)
58 0-255 Shunting speed (ex-works setting F3)
59 0-255 Switching off the delay (ex-works setting F4)
0-255 Lighting effect at function outputs A and B. The units digit of the
60
value stands for function output A, the tens digit for function
output B:
0
1
2
3
4
61 0-255 Function mapping: lighting effect at function outputs A and B
0-255
62 Lighting effect at function outputs C and D.
The tens digit of the value stands
for function output D:
0
1
2
No effect
Marslight
Gyrolight
Strobe
Double strobe
No effect
Flashing at same time as
function output C
Flashing alternately to function
Information SILVERdirect
The units digit of the value
stands for function output C:
0 No effect
1 Flashing
2 Flickering type 1
(smooth)
0
4
8
0
0
0