Publicité
Les langues disponibles
Les langues disponibles
0
normal: locomotive drives forward if the arrow on the manual
control points up.
1
interchanged: locomotive drives forward if the arrow on the
manual control points down.
2 (1)
Running-notches mode:
0
Operation with 14 or 27 running notches.
This setting is chosen for digital systems which do not
support the 28 running-notches mode.
1
Operation with 28 or 128 running notches.
This setting is chosen for digital systems which support the
28/128 running-notches mode.
3 (2)
Operational mode:
0
Locomotive only runs in digital operation.
1
Locomotive runs both in digital and conventional operation,
flying splice possible.
4 (3)
not used
5 (4)
0
factory pre-set speed curve is used
1
User defined speed curve is used
6 (5)
0
Decoder uses basic address (from CV1)
1
Decoder uses extended address (from CV17 and CV18)
7-8(6-7)
Not used
Bit
30
Fault display
1 (0)
1
Light short-circuit
2 (1)
not used
29
E
1
1
0
0
0
0
0 (dec)
0
0
Publicité
