Napoleon purview 42 Serie Manuel D'installation Et D'utilisation page 24

operating instructions
EN
Power
Orange
Flame
White
Flame
Heater
Timer
Temperature
24
W415-2803 / B / 06.01.20
Turns the appliance on / off.
Controls orange fl ame brightness.
5 Settings:
F4 - Brightest
F3
F2
F1
F0 - Dimmest
Controls white fl ame brightness.
5 Settings:
F4 - Brightest
F3
F2
F1
F0 - Dimmest
Controls the heater. Press button to initiate.
4 Settings:
H0 - No heater or blower
bL - Blower only
H1 - Heater blows warm air (750W)
H2 - Heater blows hot air (1500W)
NOTE: Heater functions cycle from H0-bL-H1-H2. Press and hold
the heater button for 5 seconds to lock the heater and temperature
to the selected setting. Press and hold the button again for 5 sec-
onds to unlock.
Controls the timer. Press button until desired setting is reached.
9 Settings: 30, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H
Controls the temperature.
1. Press once to activate the touch panel indicator.
2. Press again until desired setting is reached. Digital display shows
setting circles as below:
Display Value 0 1 2 3 4 5 6 7 8 9
°C
18 19 20 21 22 23 24 25 26 27 ON
Temperature
°F 64 66 68 70 72 74 76 78 80 82 ON
NOTE: Press and hold the button for 5 seconds to switch the tem-
perature from °C to °F and vice versa.
N