Binzel Abicor iSTM Mode D'emploi page 36

6 Putting into operation
6.4 Attaching the ABIROB
1 ABIROB
2 Positioning pin
Fig. 8
1 Equip the ABIROB
2 Introduce the positioning pin (2) into the marked bore.
The ABIROB
3 Tighten the ABIROB
NOTICE
• After using the torch for a prolonged period, it may happen that it can no longer be
disconnected by hand. To do this, a suitable wrench is available. Do not use pliers to
disconnect the torch.
EN - 14
®
W torch neck
1
®
W torch neck 3
4
Attaching the ABIROB
®
W torch neck (1) with tip adaptor, contact tip and gas nozzle.
®
W torch neck (1) can only be fastened in this position.
®
W torch neck (1) with the nut (5) to the iSTM (3).
2
5
iSTM fastener
Connection module
®
W torch neck
3
4
5 Nut
BAL.0150 • 2020-08-03
iSTM