Binzel Abicor iSTM Mode D'emploi page 24

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Responsibilities of the user
2.3 Personal protective
equipment (PPE)
2.4 Classification of the warnings
2.5 Emergency information
3 Product description
3.1 Technical Data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Function description
6 Putting into operation
6.1 Fastening the iSTM to the robot
6.2 Mounting the cable assembly
6.2.1 Maintenance position of the robotEN-10
6.2.2 Mounting the cable assembly
on the robot
6.3 Attaching the ABIROB
torch neck
6.4 Attaching the ABIROB
torch neck
EN - 2
EN-3
EN-3
EN-3
EN-3
EN-3
EN-4
EN-4
EN-4
EN-5
EN-5
EN-6
EN-7
EN-7
EN-7
EN-8
EN-8
EN-8
EN-9
EN-9
EN-10
EN-11
®
A
EN-13
®
W
EN-14
6.5 Shortening the wire guide
6.6 Mounting the wire guide
6.6.1 Securing the wire guide
7 Operation
8 Putting out of operation
9 Maintenance and cleaning EN-17
9.1 iSTM Cleaning the ABIROB
9.2 iSTM Cleaning the ABIROB
9.3 Cleaning the wire guide
10 Troubleshooting
11 Dismounting
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
13 Spare parts
iSTM
EN-15
EN-16
EN-16
EN-16
EN-16
®
A EN-17
®
W EN-18
EN-19
EN-19
EN-20
EN-21
EN-21
EN-21
EN-21
EN-21
BAL.0150 • 2020-08-03