Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2. Take off the cover ( 2 ) with the harness using a
flat head screwdriver (-).
(2)
3. Press the locking tab and separate the Wire
Connector.
4. Remove 1 hex head bolt from each side with a
socket wrench (10 mm).
DA68-03030A-06.indb 13
(1)
English - 13
5. Lift up the Flex door from the rails.
RE-ASSEMBLING THE FLEX
DOOR
To reattach the flex door after you have moved the
fridge to its final location, assemble parts in reverse
order.
CAUTION
When reassembling the Flex Door, be sure to
reconnect the wire harness. If the wire harness is
not reconnected, the Flex Room does not work.
2016. 3. 31.
11:42
Publicité
Table des Matières
