Samsung RF30HBEDBSR/AA Guide D'utilisation page 10

CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to 'Adjusting the Level' in the manual (on
page 15).
Flat-blade screw
Control Lever
driver(-)
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor. This surface
should be strong enough to support a fully loaded
refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working. When
moving the refrigerator, you need to pull and push
it straight forwards or back. Do not wiggle it from
side to side.
DA68-03030A-06.indb 10
ACCESSORIES AND REQUIRED
TOOLS
The following accessory is included with your
refrigerator:
Shim Hinge Middle
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips Flat-blade screw
screwdriver (+)
Pliers
English - 10
2EA
Socket wrench
driver (-) (13/32") (10 mm)
Allen wrench
(3/16") (5 mm)
2016. 3. 31. 11:42