Maintenance And Cleaning; Environmental Protection; Declaration Of Conformity - Bosch GBH 2 S Instructions D'emploi

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and the ventilation slots clean.
Keep the tool holder clean at all times.
A damaged dust protection cap should be
changed immediately. We recommend having
this carried out by an after-sales service.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.

Environmental Protection

Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
15 • 1 619 929 236 • TMS • 13.06.02
To be fitted
by qualified
professional only
English - 5
Service and Customer
Assistance
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
Service
............................
Advice line
....................
Fax
.............................................
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
Service
...................................
Fax
....................................................
Australia
Robert Bosch Australia L.t.d.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton/Victoria
...............................................
Fax
...............................................
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
.....................................................
Fax
.....................................................

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following
standards or standardization
EN 50 144 according to the provisions of the di-
rectives 89/336/EEC, 98/37/EC.
Dr. Gerhard Felten
Senior Vice President Engineering Head of Product Certification
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
+44 (0) 18 95 / 83 87 89
+353 (0)1 / 414 9400
+353 (0)1 / 459 8030
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
documents:
Dr. Eckerhard Strötgen