Fino Multi KA4566
4.2 Control element
16
Start/Stop button (H.5)
–
brewing process is started by pressing this button
–
prewing process is terminated by pressing the button again
–
in case of an error/fault, problem solving function is activated by
pressing the button
–
by pressing and holding the button for at least 3 seconds with the
strainer support inserted, the "storage settings" mode is activated, see
section "3. Preparation of beverages"
–
by pressing and holding the button for at least 3 seconds with the
strainer support not inserted, the "descaling" mode is activated, see
section "5. Cleaning, care and maintenance"
Note: By means of the Start/Stop button you can restore the factory
!
settings, see section "5. Cleaning, care and maintenance".