Tea (In Bag Or Loose) - SEVERIN Fino Multi KA4566 Mode D'emploi

Fino Multi KA4566
3.3 Tea
E
E.3
E
12
Preliminary remarks: The factory settings for this appliance are such that
!
the black lid (E.1) is programmed for preparation of black tea ( rst tea type)
and the green lid (E.2) is to be used for preparation of green tea (second
tea type). However, you can change these settings any time and save your
settings separately for every lid, see section "3.3 Changing the settings for
preparation of tea".
1a. Tea bags:
As a rst step remove the tea box (E.3) from strainer support (E). Then, place
the tea bag into strainer support (E). Leave the string and paper label hang
out over the edge of the strainer support.
1b. Loose tea:
Fill loose tea into the tea box (E.3) and place it into the strainer support (E).
For very ne tea you may want to use an additional tea lter.
Important: Please make sure that the spout (E.4) is always attached.
!
2. Close the strainer support with the desired lid (E.1) or (E.2). Lock the lid
by rotating it in clockwise direction until it engages with a sound.
3. Now, open brewing unit (A). For this purpose, fully fold open the
bracket closure (B) and insert the strainer support. When inserting the
components, make sure the strainer does not get entangled.
4. Close the brewing unit (A) by rmly pressing the bracket closure (B)
downwards.
5. Place a suitable tea cup onto the drainage grille (G).
6. Press the Start/Stop button (H.5)
(cup symbol ashing (H.1)
support is lled with water. Progress is displayed by means of the
interval indication
7. At the end of the steep time the cup is lled with tea.
8. Please wait until your appliance has completed the follow-up time, i.e.
the display element (H.1)
generated.
9. Then, remove your cup from the appliance, fold the bracket closure
upwards and remove the strainer support for cleaning.
10. Ready! Enjoy your tea!
. The brewing process is started
). After a short heat-up phase the strainer
.
stops ashing. A short acoustic signal is