Display And Control Elements - SEVERIN Fino Multi KA4566 Mode D'emploi

4. Display and control elements

4.1 Display elements
Beverage quantity / brewing process (H.1)
– ashes during brewing process
– ashes fast when the appliance must be descaled
– ashes during descaling process
– lights up permanently in the "storage settings" mode for the adjustment
of beverage quantity, see section "3. Preparation of beverages"
Temperature (H.2) , only available for tea
– lights up permanently in the "storage settings" mode for the adjustment
of brewing temperature, see section "3. Preparation of beverages"
Steep time (H.3) , only available for tea
– lights up permanently in the "storage settings" mode for the adjustment
of steep time, see section "3. Preparation of beverages"
Error / storage settings (H.4)
– ashes in case of error/fault, see section "6. Fault nding and problem
solving"
– lights up permanently during descaling process
Interval indication with LED bars (H.6)
– rst bar lights up as soon as the appliance is ready for operation
– during the brewing process the other bars gradually light up until the
end of the brewing phase is reached. At the end of the brewing phase all
5 bars light up, regardless of the beverage quantity set.
– In the "storage settings" mode, see section "3. Preparation of beverages",
beverage quantity, temperature and steep time can be adjusted by
means of the bars.
EN
15