Endress Professional GT Serie Notice D'utilisation page 83

Malfunction
The machine does not start
Possible cause
A faulty bearing
No fuel
Fuel cock in the position
"OFF"
Rocker switch in the "OFF"
position
Spark plug socket dirty or
loose
Spark plug dirty
Table 6.1: Problems during generator operation
*A service station is recommended for performing these
checks or repairs
Troubleshooting
Checking the electrical safety
Correction
*Replace the bearing.
Check the fuel
Bring the fuel cock into the
open position "ON"
Bring the rocker switch into
the "ON" position
Clean the spark plug socket.
Set the opening if necessary
Clean the spark plug; replace
if necessary
37