Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LI 40AS
2.
3.
2.
1.
1.
Opening the upper front covers
8.4 Maintenance
Refrigerating circuits with a minimum refrigerant quantity of 3 kg,
or "hermetically sealed" refrigerating circuits with a minimum re-
frigerant quantity of 6 kg must be tested for leaks yearly by the
operator according to regulation (EC) No. 842/2006.
The leak test is to be documented and archived for a minimum of
5 years. The test is to be carried out by certified personnel only
according to regulation (EC) No. 1516/2007. The attached table
can be used as a basis for the documentation.
NOTE
Local regulations may differ from EU directive 842/2006. The appropriate
local regulations for heat pump leak tests must be observed.
EN-8
2.
1.
2.
3.
3.
Closing the upper front covers
452163.66.04 · FD 9301
9
Faults / Trouble-
Shooting
This heat pump is a quality product and designed for trouble-free
operation. In the event that a fault should occur, it will be indi-
cated on the heat pump manager display. Simply consult the
Faults and Trouble-Shooting page in the operating instructions of
the heat pump manager. If you cannot correct the fault yourself,
please contact your after-sales service technician.
ATTENTION!
Any work on the heat pump may only be performed by authorised and
qualified after-sales service technicians.
10 Decommissioning /
Disposal
Before removing the heat pump, disconnect it from the power
source and close all valves. The heat pump must be installed by
trained personnel. Observe all environmentally-relevant require-
ments regarding the recovery, recycling and disposal of materi-
als and components in accordance with all applicable standards.
Particular attention should be paid to the proper disposal of re-
frigerants and refrigeration oils.
www.dimplex.de
Publicité
Chapitres
Table des Matières
