HEADRUSH LOOPERBOARD Guide D'utilisation Rapide page 8

Recording & Playing Tracks
The looper lets you record onto four tracks and store each set of four tracks as a loop. Each track
can have up to 99 layers. Each track can be a minimum of 1 second long, and a maximum of 5
minutes long. You can record, play, and stop tracks independently of each other.
Tip: HeadRush Looperboard's internal memory can hold over 9 hours of audio at a time (all audio),
but if you need more storage space, connect a USB drive or SD card to HeadRush Looperboard for
additional loop storage.
Each track's meter or waveform will use a color to indicate its current state:
•
Red: recording or overdubbing
•
Green: playing
•
Blue: stopped
Use the Meter page to adjust the volume levels of the tracks.
To show the Meter page, tap the meter icon at the top of the touchscreen.
To adjust the volume of a track, tap and drag the gray line at the top of a meter to adjust its
level.
To adjust the volume of the main outputs, turn the Master knob.
8