HEADRUSH LOOPERBOARD Guide D'utilisation Rapide page 15

Track Setup
To route an input to a looper track, tap
the desired Input 1–4 button. When
Stereo Link is enabled, Inputs 1+2 and/or
Inputs 3+4 will be selected together.
To select a track output mode, tap the
Mono (monoaural) or Stereo (binaural)
buttons.
To route a track to an output, tap the
desired Output 1–4 button. If the output
mode is Stereo, Outputs 1+2 and/or
Outputs 3+4 will be selected together.
To route a track to the phones output, tap the headphone icon at the bottom of each track. Use
the Phones knob to adjust the output volume level.
To route the click to an output, tap an Output 1–4 button under Click on the right side of the
touchscreen. Tap the headphone icon to route the click to the phones output. Use the Master
and Phones knobs to adjust the output volume level of the outputs and phones, respectively.
To select routing for the stereo backing track, tap the 1+2 or 3+4 buttons under B. Track Output
on the right side of the touchscreen. Tap the headphone icon to route the backing track to the
phones output. Use the Master and Phones knobs to adjust the output volume level of the
outputs and phones, respectively.
Output Setup
To adjust the output level of an individual
output, tap and drag the orange line at
the top of its meter.
15