Askoll eS1 Mode D'emploi page 273

Setting the clock
• Press and hold SELECT button for 2 seconds: two
hour digits will start blinking.
• Press SELECT as necessary to set the right hour.
• Press SET: minutes digits will start blinking while
hour digits will not blink any more.
• Press SELECT as necessary to set the right
minutes.
• Press SET button to exit.
Since time is stored in the vehicle battery, in case of
two batteries, it is convenient to set the clock with both
batteries installed to synchronize time. In the presence
of two batteries, time displayed is the one stored in
compartment A.
For battery description and placement in compartments
A and B refer to the chapter "BATTERY AND
CHARGE".
eS_Rev02_EN.indb 33 eS_Rev02_EN.indb 33
eS - eS 25Km/h - eS - eS 25Km/h - eS
1 1 2 2
A Km/trip
PWR
%
SELECT
eS EVO - eS EVO
2 3
USE
EN
3
EN
EN
EN
SET
EN
33
15/07/2020 11:58:26 15/07/2020 11:58:26