livin flame Lyon Manuel De Montage Et Mode D'emploi page 21

SECTION 3: OPERATING INSTRUCTIONS
WARNING! Do not operate the appliance if it is damaged or has malfunctioned. If you suspect the
appliance is damaged or has malfunctioned call a qualified service engineer to inspect the appliance, and
replace any part of the electrical system if necessary, before reuse.
WARNING! To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum
distance of 1 meter from the air outlet.
MAKE SURE the plug fits tight in the outlet. Faulty wall outlet connections or loose plugs can cause the
outlet to overheat.
Do not disconnect the power at the mains supply whilst the appliance is running. Use the functions on
the remote to turn the fire off and ensure the mains switch has been moved to the off position before
disconnecting.
PREPARATION BEFORE USE
3.1 The appliance can be operated by both remote control and the manual controls on the appliance.
NOTE: To use both remote and manual functions the manual on/off switch must be in 'ON' position. In
order to prevent the product becoming too hot, there is 10s delay when turning on the heater and a 10s
delay when turning off the heater fan.
Batteries
Ensure that the handset batteries are new and inserted correctly.
Main Power Switch
3.2 The mains power switch is located on the control panel located on the left-hand side of the heater
box.
3.3 Switch ON (—) before operating either the remote or manual controls.
3.4 A long beep is heard to indicate the fire is ready for use.
3.1 Operating by Manual Button
NOTE! The manual button on the fire box unit will not provide you with all function control, and its
propose is to control some basic function when you lose the remote handset. Please use the remote hand
set to carry out all functions.
21