livin flame Lyon Manuel De Montage Et Mode D'emploi page 19

STEP 3. Put the plastic wall plug into the holes. If the wall is solid wood, it is no needed to drill the holes on
the wood and no needed of the plastic wall plug. Then fix 2pcs ST5*40 screws into two top holes.
STEP 4. Fix the lower support brackets on the bottom of the firebox by ST4*8 screws. Put the fire box
on the top two ST5*40 screws and then secure the lower support brackets by another 2pcs ST5*40
screws.
STEP 5. a. For white pebble stones:
Carefully arrange the decorative stones (WS/CS) along the inset window ledge at the front of the firebox.
Use care when relocating the fireplace to prevent the stones from falling out.
b. For log:
Carefully put the log on the fuel bed.
19