livin flame Lyon Manuel De Montage Et Mode D'emploi page 18

2.3 ASSEMBLY: WALL-HANGING MODE
STEP 1. Find a safe location. Minimum clearance on each side must be at least 200mm; minimum
clearance from the floor must be at least 350mm; minimum clearance from the front must be at least 3
feet (90 cm). Choose a location near an outlet so an extension cord is not required. DO NOT position
the unit directly below a power outlet.
STEP 2. Choose a solid and plain wall, mark the 4 holes by a pen same as the size below.
rill 4pcs Φ8
Then d
holes on the wall.
18