Technical Data - ESYLUX AL S 230i Notice De Montage Et D'utilisation

9 • ESYLUX MANUFACTURER'S GUARANTEE
ESYLUX products are tested in accordance with applicable regulations and manufactured
with the utmost care. The guarantor, ESYLUX Deutschland GmbH, Postfach 1840,
D-22908 Ahrensburg, Germany (for Germany) or the relevant ESYLUX distributor in your
country (visit www.esylux.com for a complete overview) provides a guarantee against
manufacturing/material defects in ESYLUX devices for a period of three years from the
date of manufacture.
This guarantee is independent of your legal rights with respect to the seller of the device.
The guarantee does not apply to natural wear and tear, changes/interference caused by
environmental factors or damage in transit, nor to damage caused as a result of failure
to follow the user or maintenance instructions and/or as a result of improper installation.
Any illuminants or batteries supplied with the device are not covered by the guarantee.
The guarantee can only be honoured if the device is sent back with the invoice/receipt,
unchanged, packed and with sufficient postage to the guarantor, along with a brief
description of the fault, as soon as a defect has been identified.
If the guarantee claim proves justified, the guarantor will, within a reasonable period,
either repair the device or replace it. The guarantee does not cover further claims;
in particular, the guarantor will not be liable for damages resulting from the device's
defectiveness. If the claim is unfounded (e.g. because the guarantee has expired or the
fault is not covered by the guarantee), then the guarantor may attempt to repair the
device for you for a fee, keeping costs to a minimum.

TECHNICAL DATA

MAINS VOLTAGE
230 V ~ 50 Hz
FOR BULB max. 100 W/E27,
FIELD OF DETECTION
230° (2 x 115° can be set independently) and 360°creep zone protection
RANGE
approx. 16 m, at an installation height of 1,80 m
SETTINGS
Mechanically using the setting controls, electronically using the infrared remote control
SWITCHING CAPACITY
230 V ~ 50 Hz, 1000 W/5 A (cos
TIME SETTING Impulse/approx. 15 seconds - 30 minutes
LIGHT EXPOSURE VALUE APPROX. 2 - 2500 LUX
PROTECTION TYPE/CLASS IP 44, II
TEST SYMBOL TÜV Süd
OPERATING TEMPERATURE RANGE
-25 °C...+55 °C
CASING
UV-stabilised polycarbonate
COLOUR
white, similar to RAL 9010, black, similar to RAL 9005, Stainless steel look
APPROX. DIMENSION
width 140 mm, height 130 mm, depth 211 mm
Technical and design features may be subject to change. You can find out more about this
product on the ESYLUX homepage.
max. 26 W/E27
φ φ
= 1), 500 VA/2,5 A (cos = 0,5)
GB
13 13