Samson Stage XPD1 Guide De Démarrage Rapide page 2

CE Declaration
We, Samson Technologies Corporation, located at 45 Gilpin Ave,
Hauppauge, NY 11788 USA declare under our own responsibility that
these devices are in conformity with the essential requirements of R&TTE
Directive 1999/5/EC when installed in accordance with the installation
instructions contained in the product documentation. To the effect that
the standards and/or technical specifications referenced below have been
applied as indicated:
EN 60065:2002+A1+A11+A2+A12
EN 300 328 V1.7.1
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 62479:2010
Year of CE Marking (Low Voltage Directive): 2014
The products shall contain the CE marking and shall be accompanied by
the identification number of the Notified Body 0197. This equipment will
also carry the Class 2 equipment identifier.
If you want to dispose this product, do not mix it with general
household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires
proper treatment, recovery and recycling.
Private household in the 28 member states of the EU, in Switzerland
and Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar
new one).
For Countries not mentioned above, please contact your local authorities
for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the
necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.
Copyright 2015
v2
Samson Technologies Corp.
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
www.samsontech.com