Publicité
Les langues disponibles
Les langues disponibles
#
WARNING : TO AVOID ELECTRIC SHOCK HAZARD, OR DAMAGE TO THE METER, DO NOT ATTEMPT TO
MEASURE VOLTAGES THAT MIGHT EXCEED 600 V rms. DO NOT APPLY MORE THAN
600V rms BETWEEN THE COMMON INPUT TERMINAL AND EARTH GROUND.
3-3 Current Measurements
1. Set the rotary switch to the required position.
2. Set the DC/AC switch to the required position.
3. Connect black test lead to "COM" terminal.
4. Connect red test lead to "µA mA" terminal for measurements up to 200mA.
For measuring current between 200mA and 10A, connect red test lead to "10A" terminal.
5. Connect test leads to measuring points and read the displayed value.
3-4 Resistance Measurement
1. Set the rotary switch to the required position.
è
2. Connect black test leads to "COM" terminal and red test lead to "V
Hz" input terminal.
3. Connect test leads to measuring points and read the displayed value.
20
Publicité
