Isofix Detection Electronic System; Recycling And Maintenance - JANE EXO Instructions

ISOfix detection electronic system.

This system detects if the ISOfix fasteners are connected. You can see the state of the ISOfix system by
the lights on the front panel and hear it with the beeps it emits. The front panel has 3 leds, the sides
(11b) indicate the state of the ISOfix fasteners: green if they are connected well (long beep), red if they
are disconnected (intermittent beep). During installation with ISOfix fasteners the electronic system
is automatically activated. To find out the current state of the ISOfix fasteners after installation, press
the "TEST" key.
The central (11c) will flash when the batteries
are about to wear out.

Recycling and maintenance

This detection system should be recycled in accordance with directive
2002/96/EC. All electric or electronic apparatus should be disposed of
correctly at specific collection points designated by local councils.
51