Everfocus Dvr; Description; Connections; Dvr Config Uration - Videotec DCK Manuel D'instructions

5.17 Everfocus DVR

5.17.1 Description

Everfocus Digital Video Recorders (EDSR400, EDSR100, EDSR900, EDSR1600 and the respective H
versions) are professional devices used to record video signals. Each video input provides a videoloop. Each
unit features a main video output and a call video output.
Communication from keyboard to DVR is monodirectional.
5.17.2 Connection s
5.17.2.1 Cable
5.17.2.2 DVR settings
Using the local DVR keyboard set the communication baudrate and a proper ID number in RS232/RS485
SETTING MENU. Only RS485 parameters have to be considered: set STOP BIT 1, parity NONE, data bit 8.
5.17.2.3 Keyboard set tings
During keyboard setup, submenu




5.17.2.4 Operational t est
When the keyboard is connected directly to the DVR, using a cable as shown above, it should be immediately
possible to switch video channels:
DEVICE

• push [
CH
 
• push [
]

5.17.3 DVR Config uration

The DVR is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the
various configuration items.
Configuration controlled by a remote keyboard is allowed only in DVR mode, pushing [
DCJ
RS485A
RS485B

Select the proper baudrate and DVR model.
] and choose a DVR number
CH
 
, [ ] to select a video channel.
RJjack 1 RJjack 2
white yellow
yellow black
Page 42
DVR
RS485A
RS485B
must be suitably set:
MENU

MNVCDCK_0441
].