Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.2.3 Everfocus D VR Control
5.2.3.1 DVR Mode
When the keyboard is set to control an Everfocus DVR a special screen is proposed:
reads the active DVR number.
DVR mode switches keys behaviour and the new meaning is read in light color close to each key. Please read
the DVR manual to understand each key use.
When the keyboard is in DVR mode it can completely control the DVR and cannot control telemetry receivers or
domes.
To switch to and fro DVR mode and Telemetry mode push [
DVR Mode procedures
Select the active DVR:
DEVICE
•
push [
•
insert DVR number (0 to 16382)
•
confirm with [
Video channel request:
CH
•
push [
]
•
insert the requested video channel
•
when necessary confirm with [
Jog and shuttle
Jog and Shuttle corresponds to the DVR knob movements.
Jog control is obtained by means of [
Shuttle knob is emulated by [
establish shuttle speed.
SHUTTLE<
[
] is equivalent to an anticlockwise rotation of shuttle knob; [
rotation.
Here are a few examples of shuttle emulation:
SHUTTLE<
[
]
SHUTTLE>
[
]
5.2.4 "Views"
Views can be used to carry out a series of four operations by pressing only one key:
• selection of a new active monitor
• selection of a camera on the new active monitor
If the views are set up correctly this will speed up operations by making 10 preset camera/monitor operations
available to the operator.
The use of views is especially useful in alarm situations: if key
3, just pressing key
By pressing the key the operator will therefore be able to quickly recall a preset position defined on a monitor.
]
MODE
].
MODE
JOG<
SHUTTLE<
activates a REWIND 6x function.
activates a F.FWD 600x function.
will replace the sequence
DVR MODE
].
JOG>
] and [
]: each push is equivalent to one jog kick.
SHUTTLE>
] and [
Page 17
].
] together with a numeric key
SHUTTLE>
is associated with camera 12 and monitor
.
to
] to a clockwise
MNVCDCK_0441
Publicité
Chapitres
Table des Matières
