Electric Connection; Destroying The Packing; Disposing Your Old Refrigerator - Beko BU 1100 HCA Mode D'emploi

Masquer les pouces Voir aussi pour BU 1100 HCA:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 68
level is a little higher when compared
to other non-no-frost units because
of the operation of the fans inside the
unit. This is very normal and is not a
malfunction.
5- The front edges of the refrigerator
may be warm. This is normal. These
areas are designed to be warm to
prevent condensation.

Electric connection

Connect the machine to a grounded
socket protected by a fuse having
appropriate capacity.
Important:
• The connection must be in
compliance with national regulations.
• The electric cablo plug must be easily
accessible after installation.
• Voltage and permitted fuse protection
are specified in "Specifications"
section.
• The specified voltage must be equal
to your mains voltage.
• Extension cables and multiway plugs
must not be used for connecting the
unit.
B
A damaged electric cable must be
replaced by a qualified electrician.
B
The appliance must not be operated
before it is repaired! There is danger
of electric shock!

Destroying the packing

The packing materials may be
dangerous for children. Keep the
packing materials out of the reach
of children or throw them away by
classifying them in accordance with
the waste instructions. Do not throw
them away along with the normal
household waste.
The packing of your machine is
produced from recyclable materials.
Disposing your old
refrigerator
Dispose your old machine without
harming the environment.
• You may consult your authorized
seller or disposal center of your
municipality about the disposal of
your machine.
Before disposing your machine, cut
out the electric plug and, if there are
any locks on the door, make them
unoperatable not to expose children to
any danger.
9
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bu 1101

Table des Matières