Specifications; General Data - Sartorius Secura Notice D'installation Et D'utilisation

Specifications

General Data

AC adapter
Sartorius AC Adapter
Primary
Secondary
Further details
Balance
Supply voltage
Power consumption
Further details
Ambient conditions
The technical data apply under the following ambient conditions:
Environment
Ambient temperature*
Operational capability
Storage and shipping
Height above sea level (NN)
Relative humidity**
Safety of Electrical Equipment
Electromagnetic Compatibility
Defined immunity to interference
Interference emission
Standard Equipment
1
Selectable weight units )
Available application programs
CE model balances verified for use in legal metrology comply with the requirements of Council Directive 2009/23/EC,
EN 45501:1992 and OIML R76:2006.
* For use in legal metrology in accordance with EU requirements, refer to the information on the balance.
** For use in legal metrology in accordance with EU requirements, the legal regulations apply.
1
) Depending on the country-specific model version, not all weight units listed may be available.
10
Installation and Operating Instructions Secura
YEPS01-PS4 or YEPS01-PS5 with replaceable country-specific power plug adapters
100 – 240 V~, ± 10%. 50 – 60 Hz ± 5%, 0.2 A
15 V , ± 5%, 530 mA (max.)/8 Watt (max.): 0°C to +40°C
DC
15 V , ± 5%, 330 mA (max.)/5 Watt (max.): +40°C to +50°C
DC
Protection class II in accordance with EN/IEC 60950-1 | up to 3000 m above sea level
IP40 in accordance with EN 60529/IEC 60529
Only via Sartorius AC adapter YEPS01-PS4 or YEPS01-PS5 with replaceable country-
specific power plug adapters
W 4.5 (typically)
IP43 in accordance with EN 60529/IEC 60529
For indoor use only
°C +10 to +30
°C Guaranteed between +5 and +45.
°C –10 to +60
m Up to 3000
15 – 80% for temperatures up to 31°C non-condensing, decreasing linearly up to 50%
relative humidity at 40°C and 20% at 50°C.
As per EN 61010-1 / IEC 61010-1
Safety requirements for electrical equipment for measurement, control,
and laboratory use –
As per EN 61326-1 / IEC 61326-1
Electrical equipment for measurement, control, and laboratory use -
EMC requirements – Part 1: General requirements
Suitable for use in industrial areas
Class B (suitable for use in residential areas and areas that are connected to a low
voltage network that also supplies residential buildings). The device can therefore be
used in both areas.
Gram, kilogram, carat, pound, ounce, troy ounce, Hong Kong tael, Singapore tael,
Taiwan tael, grain, pennyweight, milligram, parts per pound, China tael, mommes,
Austrian carat, tola, baht, mesghal and Newton
®
Secura models: counting, weighing in percent, density determination, peak hold,
unstable condition, checkweighing, mixing, totalizing, statistics, conversion, SQmin, and
Identifiers
Quintix ® models: counting, weighing in percent, density determination, peak hold,
unstable condition, checkweighing, mixing, totalizing, statistics, conversion
®
Practum models: counting, weighing in percent, density determination, peak hold,
unstable condition, checkweighing
® ® ®
, Quintix , Practum
Model-specific data on page 92
Part 1: General requirements