Declaration Of Conformity; Description Of The Unit; Remote Controller - Saunier Duval SDH 18-025 NW Mode D'emploi

INTRODUCTION
4

Declaration of conformity

The manufacturer declares that this unit has been designed and
constructed in compliance with the standard in force with regard
to obtaining the CE Marking.
The appliance type satisfy the essential requirements of the
relevant directives and Standards:
• 2006/95/EEC including amendments:
"Directive on the harmonisation of the laws of Member States
relating to electrical equipment designed for use within certain
voltage limits"
Designed and built according to European Standards:
- EN 60335-1
- EN 60335-2-40
- EN 50366
• 2004/108/EEC including amendments:
"Directive on the approximation of the law of the member states
relating to electromagnetic compatibility"
Designed and built according to European Standards:
- EN 55014-1
- EN 55014-2
- EN 61000-3-2
- EN 61000-3-3
- EN 61000-3-11
EN
- 6 -
5

Description of the unit

This unit is comprised of the following elements:
- Indoor unit.
- Outdoor unit.

- Remote controller.

- Connections and accessories.
Figure 5.1 shows the unit components.
5
4
3
2
Fig. 5.1 Unit components.
Legend
1 Interconnecting pipework
2 Condensed water drainage pipe
3 Outdoor Unit
4 Remote controller
5 Indoor Unit
5.1 Remote Controller
The remote controller allows the unit´s functions to be set as
required. In order for the unit to receive the commands properly,
the remote control must be pointing directly at the indoor unit,
with no obstacles between them whatsoever.
SDH18-NW-U_EN - 05/14 - Saunier Duval
1