7- Indicators On The Display Of The Remote Control; 8- Indications Of The Unit - Saunier Duval SDH 31-026 NW Notice D'utilisation

7- INDICATORS ON THE DISPLAY OF REMOTE CONTROL
3
6
1

8- INDICATIONS OF THE UNIT

Running
indicator.
Receiver of remote control
signal.
1 Time indicator
Displays the timer AUTO-ON/OFF time (1 – 24 hours).
The clock is only displayed if timer AUTO-ON/OFF settings are
selected.
2 Fan speed indicator
Displays the selected fan speed in the AUTO mode and in the
5
three fan speed levels "I" (LOW), "II" (MED), and "III" (HIGH). As
long as the modes AUTO or DRY are selected, AUTO is
displayed.
4
3 Temperature indicator
Displays the temperature setting (16°C – 32°C), if the fan mode
2
is selected, the temperature indicator is displayed, if the AUTO
or DRY mode is selected, the temperature indicator is only
showed 25°C, it can not be adjusted.
4 LOCK indicator
This indicator is displayed as long as the LOCK function is
selected. After LOCK function is cancelled by pressing HOLD
button again, this indicator is cleared from the display.
5 SLEEP indicator
This indicator is displayed as long as the SLEEP function is
selected. After SLEEP function is cancelled by pressing TURBO/
SLEEP button for more than 2 seconds again, this indicator is
cleared from the display.
6 Mode indicators
According to the selected operation following mode indicators
appear on the display: AUTO, COOL, DRY, HEAT, FAN ONLY.
Timer
indicator.
Setting temperature, timer time, and failure
code indicator.
7
Turbo operation indicator. When the air conditioner is on
TURBO operation, this lamp illuminates
ECONO indicator. When the air
conditioner operates at some low
speed, this ECONO lamp
illuminates.