Accessories On Request - Nice MFAB3000 Instructions Et Avertissements Pour L'installation Et L'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
PLA10 Vertical electric lock 12 Vac
MEA1 360° opening device
CAUTIONS: • The technical features set out refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.a. reserves the right to make alterations to the product
any time it deems it necessary, keeping the same functionality and destination of use.
Power supply
Absorbed current
Absorbed power
Incorporated capacitor
Protection class
Speed
Torque
Operating temperature
Thermal protection
Work cycle
Weight
CE declaration of conformity and declaration
of incorporation for a "quasi-machine"
Declaration in accordance with Directives: 2014/30/UE (EMC); 2006/42/EC
(MD) annex II, part B.
Note - The content of this declaration corresponds to the declaration made in the of-
ficial document filed in the offices of Nice S.p.a., and particularly the latest version
thereof available prior to the printing of this manual. The text contained here has been
adapted to meet editorial requirements. A copy of the original declaration may be re-
quested from Nice S.p.a. (TV) I.
Declaration number: 134/MFAB
Name of manufacturer: NICE S.p.A.
Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy.
Person authorized to provide technical documentation: NICE S.p.A. – Via Pezza
Alta N°13, 31046 Rustignè di Oderzo (TV) Italy.
Product type: Electric gearmotor for swing gates.
Model / Type : MFAB3024, MFAB3000, MFAB3000L, MFAB3000/110, MFAB3010,
MFAB3024HS
Accessories: No accessory.
The undersigned Roberto Griffa, as Chief Executive Officer, hereby declares under his
own responsibility that the products identified above comply with the provisions of the
following directives:
• DIRECTIVE 2014/30/UE OF THE EUROPEAN PARLIAMENT AND COUNCIL of
February 26 2014 concerning alignment of Member States' legislation regarding
electromagnetic compatibility (consolidated text), according to the following harmo-
nized standards: EN 61000-6-2:2005; EN 61000-6-3:2007 + A1:2011.
The product also complies with the following directive in accordance with the require-
ments for "quasi-machines":
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May
17 2006 regarding machines and amending directive 95/16/EC (consolidated text).
– I declare that the pertinent technical documentation has been prepared in accord-

Accessories On Request

PLA11 Horizontal electric lock 12 Vac
MEA2 Key-operated release mechanism
TECHNICAL FEATURES OF THE PRODUCT
MFAB3000
MFAB3010
230 Vac; 50 Hz
230 Vac; 50 Hz
1.2 A
1.2 A
250 W
250 W
10 uF
10 uF
IP 67
IP 67
1.14 Rpm
1.14 Rpm
300 Nm
300 Nm
140 °C
140 °C
30 %
40 %
11 kg
11.5 kg
Revision: 14
Language: EN
MEA3 Lever-operated release mechanism
MFAB3000L
MFAB3000/110
230 Vac; 50 Hz
110 Vac; 60 Hz
1.3 A
2.4 A
300 W
250 W
10 uF
30 uF
IP 67
IP 67
0.8 Rpm
1.4 Rpm
250 Nm
300 Nm
-20 °C to +50 °C
140 °C
140 °C
30 %
30 %
11 kg
11 kg
ance with Annex VII B to Directive 2006/42/EC and that the following essential re-
quirements have been met:
1.1.1 - 1.1.2 - 1.1.3 - 1.2.1 -1.2.6 - 1.5.1 -1.5.2 - 1.5.5 - 1.5.6 - 1.5.7 - 1.5.8 -
1.5.10 - 1.5.11.
– The manufacturer agrees to send the national authorities pertinent information on
the "quasi-machine" in response to a motivated request without affecting its intel-
lectual property rights.
– If the "quasi-machine" is operated in a European country with an official language
other than the language used in this declaration, the importer must associate a
translation with this declaration.
– The "quasi-machine" must not be operated until the final machine in which it is to
be incorporated is declared to conform to the provisions of Directive 2006/42/EC, if
applicable to it.
The product also complies with the following standards: EN 60335-1:2002 + A1:2004
+ A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011; EN 60335-
2-103:2003 + A11:2009.
The parts of the product which are subject to the following standards comply
with them: EN 13241-1:2003 + A1:2011; EN 12445:2002; EN 12453:2002; EN
12978:2003 + A1:2009.
Oderzo, April 21 2016
MFAB3024
MFAB3024HS
24 Vdc
24 Vdc
5 A
6 A
120 W
170 W
–––
–––
IP 67
IP 67
1.4 Rpm
2.6 Rpm
250 Nm
180 Nm
–––
–––
80 %
80 %
11 kg
11 kg
Eng. Roberto Griffa
(Chief Executive Officer)
English – 4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mfab3010Mfab3000lMfab3000/110Mfab3024Mfab3024hs

Table des Matières