Maintenance And Storage; Extraordinary Maintenance; Motor Cooling; Accessories - Stiga T 1.0 EJ Traduction De La Notice Originale

10
EN

8. MAINTENANCE AND STORAGE

WARNING!
of others:
– After each use, disconnect the machine
from the mains and check for damage.
– Correct maintenance is essential to maintain
the original efficiency and safety of the ma-
chine over time.
– Keep all nuts, bolts and screws tight to be
sure the equipment is in safe working con-
dition.
– Never use the machine with worn or dam-
aged parts. Damaged parts are to be re-
placed and never repaired.
– Only use original spare parts. Parts that are
not of the same quality can seriously dam-
age the equipment and compromise safety.
WARNING!
ations unplug the machine from the mains.

1. MOTOR COOLING

To avoid overheating and damage to the motor, al-
ways keep the cooling air vents clean and free of
sawdust and debris.
2. HEAD COIL REPLACEMENT (Fig. 10)
– Follow the sequence indicated in the figure.
3. SHARPENING THE LINE CUTTING KNIFE
(Fig. 11)
– Unscrew the two screws (1) and remove the line
cutting knife (2) from the guard (3).

9. ACCESSORIES

The table contains a list of all available acces-
sories, indicating those which may be used on
each machine, marked with the symbol "
WARNING!
selection, application and usage of the acces-
sory to be fitted in the variety of possible us-
For your safety and that
During maintenance oper-
In consideration that the
Code
118801750/0 (M8 x 1,25 dx M)
MAINTENANCE AND STORAGE / ACCESSORIES
– Fix the line cutting knife in a vice and sharpen it
using a flat file, being careful to retain the origi-
nal cutting angle.
– Refit the knife on the guard.
4. ELECTRIC CABLES
WARNING!
electric cables regularly and replace them if
they are worn or their insulation looks dam-
aged.
If the appliance's power supply wire is damaged, it
must be replaced by the manufacturer, service
agent or a similar qualified person.

5. EXTRAORDINARY MAINTENANCE

All maintenance operations not foreseen in this
manual must be performed exclusively by your
dealer.
All and any operations performed in unauthorised
centres or by unqualified persons will totally inval-
idate the warranty.
6. STORAGE
After every work stint, clean the machine thor-
oughly to remove all dust and debris, and repair or
replace any faulty parts.
The machine must be stored in a dry place away
from the elements and out of the reach of children.
age are actions made solely by the user, the
latter assumes responsibility for damages of
". any kind due to such actions. When in doubt or
if lacking knowledge of the specificity of each
accessory, contact your retailer or specialised
gardening centre.
Model
Check the condition of the
T 1.0 EJ SGT 1000 J