Packing, Transport & Storage - CLAS PE 4000 Manuel D'utilisation

PE 4000
PACKING, TRANSPORT & STORAGE
All the operation described below must be carry out by expert personnel only.
PACKAGING: Packaging dimension (Figure 1)
TRANSPORT (Figure 2)
Packaging can be lifted and moved by forklift truck, crane or overhead cranes. In the
case of sling load operations, to avoid dangerous oscillations, it is required the presence
of a second person that helps on the safe handling of the goods.
At the time of receipt of the goods, verify that all the items listed in the packing list are
included.
If found missing parts, defects, damage to the packaging or to the goods caused by the
transportation please inform immediately the courier or a referenced person named by the
producer.
The packaging must be handled like shown in figure 2, especially during operations of
loading and unloading with non standard equipment such as forklifts.
STORAGE:
The Lift equipment should be stored inside the warehouse.
If it is stored outside make sure that the material is protected from the water.
The storage temperature range indicated for the equipment goes from a min of -25ºC – to
a maximum of + 55°C
32
PE 4001
Picture 2