Epson TM-T58 Manuel De L'utilisateur page 12

English
Printing method
Printing speed
Paper feed speed
Line spacing (default)
Character structure
Roll Paper (single-ply)
Thermal paper type
Interface
Receive buffer
Supply voltage
Current consumption
Life
MTBF
MCBF
Temperature
Humidity
Overall dimensions
Weight (mass)
dpi: dots per 25.4 mm (dots per inch)
10 TM-T58 User's Manual
Thermal line printing
Maximum 100 mm/s {3.9"/s}
Raster bit image/barcodes: 70 mm/s {2.8"/s}
The values are when the printer prints with density "Normal" at 24 V and
25 °C {77°F}
Approx. 100 mm/s {3.9"/s} (continuous paper feed)
3.75 mm {1/7"}
Font A: 12 × 24 (including 2-dot horizontal spacing)
Thai/Vietnam character font: 12 × 24
Width: 57.5 ± 0.5 mm {2.26 ± 0.02"}
Maximum outside diameter: 83 mm {3.26"}
Minimum Roll Paper spool diameter: Outside: 18 mm {0.71"}
Specified: Mitsubishi HiTec F5041, NIPPON Paper Industries Co., Ltd. TF50KS-
E, Kanzaki Specialty Papers P350, OJI Paper Mfg. Co., Ltd. PD150R/160R,
Kanzan KF50
Serial (RS-232), Parallel (IEEE1284)
2 KB
DC + 24V ± 5%
1.1A
Mechanism: 6,000,000 lines
Thermal head: 50 million pulses, 50km
(When printing the specified pattern)
180,000 hours
15,000,000 lines
(Average failure interval based on failures relating to wearout and
random failures up to the life of 6 million lines.)
Operating: 5 to 45 °C {41 to 113 °F}
Storage: -10 to 50 °C {14 to 122 °F}, except for roll paper
Operating: 10 to 90% RH
Storage: 10 to 90% RH, except for roll paper
137 × 116 × 204 mm {5.39 × 4.57 × 8.03"} (H × W × D)
Approx. 1.3 kg {2.9 lb}, except for roll paper