Dexter 800AG2-125.5 Manuel D'instruction page 190

FR
Machine 1. Disc is out-of-round.
vibrates 2. Disc is chipped.
ES
or shakes. 3. Disc is loose.
4. Machine is not secure.
PT
5. Work surface is uneven.
IT
EL
PL
13. GUARANTEE
UA
DEXTER products are designed based on the mostrigorous quality standards for
RO
products intended for the general public.
The Angle Grinder (Model n° 800AG2-125.5) is covered with a warranty of 3
EN
years. starting from the date of purchase. This warranty covers all
manufacturing or material defects.
In the event of a breakdown, please refer first to the troubleshooting page
(problems and solutions)in the brochure; if the problem persists, please check
with the nearest store.
Your store shall spare no effort in resolving the issue.
Repairs and change of parts do not extend the duration of the initial warranty.
Breakdowns resulting from normal wear and tear or from improper use of the
product are not covered by the warranty. This includes, among others, the
switches, the safety circuit breaker and the motors, in case of wear.
Please note that there are specific warranty terms for certain countries.
In case of doubt, please check with your point of sale.
For claims relating to the the warranty to be taken into account, the following
is required:
. Providing proof of purchase
. That no repairs and/or change of parts have been performed by a third party.
. That the issue is not a matter of normal wear and tear.
. That required maintenance and repair works have been performed correctly.
. That no deterioration has taken place as a result of incorrect setting of the
carburetor.
. That there has been no forcing, improper handling, unauthorised use, or
1. Replace wheel.
2. Replace wheel.
3. Set flange nut correct and
tighten it.
4. Check machine and all
hardware.
5. Feed grinding into work
slowly.
189