Dexter 800AG2-125.5 Manuel D'instruction page 186

FR
ES
PT
IT
EL
PL
UA
Please use grinding protective cover for grinding operation.
Grinding and Surface Processing
RO
In order to grind surface, you should use a coarse abrasive disk with a sunken
EN
centre.
You can use the abrasive disks with diameter of 125mm. The maximum thickness
of disks is 6mm.
Mounting the Wheels /Disks
Place the back flange A over the spindle making sure that it fits tight.
Place the grinding or cutting disc B on the top of the back flange, ensuring the
bore fits into the step of the flange.
Mount the concave recess side of the external flange C over the spindle.
Press the spindle lock button to lock the spindle firmly, then tighten the external
flange with the spanner in clockwise direction.
Allow the angle grinder to run in idle at least 1 minute with the grinding or
cutting disc correctly assembled, a vibration disc should be immediately replaced.
B
(Thick)
A
C B
(Thin)
185
A
C